Toyota Automobile Accessories 33049 User Manual

INSTALLATION INSTRUCTIONS  
Product No.  
33049  
TOYOTA TUNDRA  
75105  
SMALL PARTS  
PLYMOUTH, MI  
PACKAGE K75105  
IMPORTANT NOTES  
USE ONLY TOWING PRODUCTS SUPPLIED OR APPROVED BOLTS,  
LOCKNUTS, AND WASHERS TO INSTALL THIS HITCH  
WARNING: DO NOT LUBRICATE THREADS, BOLT FAILURE MAY  
OCCUR DUE TO OVER TIGHTENING.  
WARNING: DO NOT DRILL OR WELD TO THIS HITCH.  
TOOLS REQUIRED  
3/4” SOCKET  
18mm SOCKET  
TORQUE WRENCH  
1/2” SERRATED WASHER  
12mm HEX BOLT  
TO WELD NUTS IN THE FRAME  
1/2” CARRIAGE BOLT  
BOLT PLATE  
1/2” SERRATED WASHER  
1/2” LOCK NUT  
1. Lift the receiver up to the frame of the vehicle. Locate the large holes in the receiver brackets over the rivet heads in the  
frame.  
2. Install four (4) 1/2” serrated washers over four (4) 12mm hex bolts and insert the bolts up through the receiver brackets  
and into the weld nuts in the frame. See the diagram above.  
3. Install two (2) bolt plates over two (2) 1/2” carriage bolts and insert the bolts down through the frame and the receiver  
brackets. Install 1/2” serrated washers and 1/2” lock nuts on the bolts. See the diagram above.  
4. Torque the 12mm bolts to 75 LB-FT.  
Torque the 1/2” nuts to 75 LB-FT.  
(OVER)  
For Installation Assistance or Technical Help, Call 1-574-537-6339  
 
N75105-12-9-02 EWO3289 © 2002 TOWING PRODUCTS  
Litho in USA  

Taylor Scale THD100 User Manual
Topcom Network Router BR 604 User Manual
Toshiba DVD Player 24AF45C User Manual
Tunturi Home Gym E30R User Manual
Vermont Casting Indoor Fireplace DBR33 User Manual
Vicks Air Cleaner v9070 User Manual
Villaware Waffle Iron NDVLWFBFS1 User Manual
Vinotemp Refrigerator VT 188 User Manual
Vivitek Projector D8 Series User Manual
Vulcan Hart Electric Steamer VSX7EC ML 114822 VSX7EO ML 114821 VSX10EC ML 114824 VSX10EO ML 114823 User Manual